| The ScaleStick is a unique patented (U.S. Patent No. 5,580,448) HydroBlend anti-scale/corrosion dispensing system which was
developed to a handle a variety of applications. The ScaleStick offers
the same unparalleled scale prevention and corrosion protection as do the other HydroBlend
systems. The ScaleStick was primarily developed for low flow applications
where the average water flow rate is less than 1 gpm. Applications include:
|
 |
|
SS-10 |
The ScaleStick was specifically designed to fit most standard 10" pre-filter housings which allows it to be used in existing applications.
 |
Extra Large ScaleStick (SS-XL) Like the standard size ScaleStick (SS-10), the SS-XL fits all standard 10” filter housings allowing it to be used in existing applications. The standard ScaleStick was designed to be used in low flow applications of 1 gpm or less. The SS-XL is used In applications where the water flow or usage requirements exceed the limits of the standard ScaleStick. The SS-XL contains more than twice the HydroBlend product than the standard ScaleStick, and increased surface area results in proper feed rates in higher flow applications including multiple equipment installations. |
|
|
SS-XL |
Pictured above are Everpure™, Cuno™, Ametek™, Plymouth™, HydroFlow™, and other housings. Unlike the other HydroBlend products, the ScaleStick uses a standard prefilter head as opposed to the special flow-through delivery heads utilized by the other HydroBlend units. Like the other units, a simple glance at the clear housing lets one know when the ScaleStick needs changing.
Treatment capacities for the ScaleStick range from 3,000 to 6,000 gallons depending on the application and water usage characteristics. The ScaleStick will not only prevent formation of new limescale deposits in equipment, it will remove existing scale over prolonged use.
SEDIMENT FILTER & CARBON BLOCK WRAPS
In many applications where water treatment systems are already in use, but effective
scale prevention is still needed, the ScaleStick can be placed in an
existing 10" pre-filter housing. The housing may have been used for sediment
filtration or taste and odor filtration. In order to maintain the water quality, a special
wrap-around sediment filter or carbon block filter can be used in conjunction with the ScaleStick
in the same 10" housing. This allows the introduction of effective scale/corrosion
prevention without sacrificing existing sediment or taste & odor removal.
In new installations, this feature allows for one 10" filter housing to provide both scale/corrosion prevention and sediment/taste & odor removal. This ScaleStick / wrap-around configuration also provides a cost and space savings. For example: A ScaleStick with a carbon block warp-around filter would provide 1) Scale and corrosion prevention 2) Chlorine taste & odor removal, and 3) Sediment filtration. This would be the ideal treatment for coffee & espresso machines as well as ice machines.
The wrap-around filters will fit around the ScaleStick and also will also be removable allowing filter changes as needed. This means that if the carbon block is spent but 1/2 of the ScaleStick still remains, only the carbon block is replaced.
ScaleStick SYSTEMS
| MODEL PF-10--SS Standard Filter Housing with ScaleStick. PF-10--SSW-SW ScaleStick w/ Sediment Filter Wrap. PF-10--SSW-CW ScaleStick w/ Carbon Block Filter Wrap. |
 |
| DESCRIPTION The PF-10-SS series utilizes a standard filter housing. Cut off valve required prior to unit for filter replacement. Available in 3/4", 1/2", and 3/8" inlet/outlet. |
|
| APPLICATION Low flow rate & volume applications (< 2 gpm). Individual steamer or combi-oven where usage is less than 6 hours per day. Coffee, espresso, & tea machines. Hot water dispensers, bread proofers, & ice machines under 400 lbs. |
| MODEL PF-10-BP-SS Bypass Valve (BP) housing with ScaleStick. PF-10-BP-SSW-SW BP Housing, ScaleStick w/ Sediment Filter Wrap. PF-10-BP-SSW-CW BP Housing, ScaleStick w/ Carbon Block Filter Wrap. |
 |
| DESCRIPTION The PF-10-BP-SS series utilizes a special bypass valve-in-head feature which allows for uninterrupted water flow when maintenance is required. (3/4" inlet/outlet). |
|
| APPLICATION Low flow rate & volume applications (< 2 gpm). Individual steamer or combi-oven where usage is less than 6 hours per day. Coffee, espresso, & tea machines. Hot water dispensers, bread proofers, & ice machines under 400 lbs. |
| MODEL FA-SS-SD-TW Twin ScaleStick System w/ Sediment Pre-filter. FA-SS-CB-TW Twin ScaleStick System w/ Carbon Block Pre-filter. |
 |
| DESCRIPTION Twin ScaleStick System comes complete with twin mounting bracket, (2) ball valves, & filter wrench. Pre-filtration flexibility and higher loading capacities. |
|
| APPLICATION Moderate flow rate & volume applications (1-4 gpm). Individual steamer or combi-oven where usage is 6 hours plus per day. Multiple coffee, espresso, & tea machines. Hot water dispensers, bread proofers, & ice machines under 800 lbs. |
| MODEL FA-SS-SD-TW-20 Twin ScaleStick System w/ 20" Sediment Pre-filter. FA-SS-CB-TW-20 Twin ScaleStick System w/ 20" Carbon Block. |
 |
| DESCRIPTION Twin ScaleStick System comes complete with twin mounting bracket, (2) ball valves, & filter wrench. Pre-filtration flexibility and higher loading capacities. |
|
| APPLICATION High flow rate & volume applications (2-6 gpm). Multiple steamer or combi-oven where usage is 6 hours plus per day. Multiple coffee, espresso, & tea machines. Hot water dispensers, bread proofers, & ice machines under 1600 lbs. |
Copyright 2007 © Southeastern Filtration & Equipment Systems
